Skip to content
HardnessWise
Menu

Free tool · UK and US

What size water softener do I need?

Softener size depends on three things: how many people live in your home, how much water each person uses and how hard your water is. Multiply them to get the hardness to remove each day, in grains. A softener should handle about7 days of that between two regenerations.

Where do you live?

How the calculation works

  1. Water used per day = people × water use per person.
  2. Grains per day = water used per day (US gallons) × hardness (grains per gallon).
  3. Grains between regenerations = grains per day × 7 days.
  4. Recommended size: the smallest standard softener whose capacity covers that amount, using83% of its rated capacity. Rated capacities assume the highest salt setting; sizing with some margin lets the softener run on a more salt-efficient setting.
  5. Salt per year = grains per day × 365 ÷ 2,500 grains removed per lb of salt.

Well water with iron needs a different approach: have it tested and ask an installer, as iron can foul a standard softener. UK figures are converted for you: 1 grain per gallon = 17.12 mg/L, and 1 US gallon = 3.785 litres. Many UK softeners are metered and sold by resin volume rather than grains; use the grains figure to compare with the manufacturer's capacity data, or ask the installer.

Where the numbers come from

AssumptionValue usedSource
Water use per person (US)
Indoor water use per person per day (USGS gives 80–100; we use the low end).
80 US gallons (range 80–100)USGS Water Science School (checked Nov 2026)
Water use per person (UK)
Average household water use per person per day in England, 2024–25.
136.5 litresEnvironment Agency, Water resources 2024 to 2025 (2024–25)
Days between regenerations
Target time between two regenerations, as in Penn State Extension's worked sizing example (about 6–7 days).
7 daysPenn State Extension, Water Softening (checked Nov 2026)
Salt efficiency
Hardness removed per lb of salt at a commonly used salt setting (10 lb per cubic foot of resin). Efficient models can exceed 3,350 (EPA WaterSense).
2,500 grains per lb of saltChem-Aqua Technical Bulletin 4-006 (water-treatment supplier) (2022)
Share of rated capacity used
Capacity at that 10 lb setting compared with the maximum (25,000 vs 30,000 grains per cubic foot).
0.83 of rated capacityChem-Aqua Technical Bulletin 4-006 (water-treatment supplier) (2022)
Standard softener sizes
Common rated capacities of home softeners sold by large US retailers.
32,000, 40,000, 48,000, 64,000, 80,000 grainsHome Depot water softener listings (checked Nov 2026)

This is an estimate. Water use varies a lot between homes: check your water bill or meter for a better figure. Next step: what would a softener cost over 10 years?

Frequently asked questions

What size water softener does a family of 4 need?

With 10 grains per gallon hardness and 80 gallons per person per day, a family of 4 removes 3,200 grains a day, or 22,400 grains over 7 days. Using 83% of the rated capacity, that points to a 32,000-grain softener. Harder water or higher use needs a bigger one.

What does a "32,000-grain" softener mean?

It is the hardness the softener can remove between two regenerations at its highest salt setting. At a lower, more salt-efficient setting the usable capacity is lower, which is why we size with a margin.

How much salt will my softener use?

Roughly the hardness removed in a year divided by the salt efficiency. In the family-of-4 example above, that is about 467 lb (212 kg) of salt a year at 2,500 grains per lb of salt.

Do I need to convert UK figures?

No. Choose UK and enter hardness in mg/L and water use in litres: the calculator converts to grains per gallon for you (1 gpg = 17.12 mg/L).